How to make a gravity bong? Can we make a gravity bong at home? How long does it take to make a gravity bong? Are you in search of all these questions? Well, your search ends here. In this article, we will discuss everything related to the gravity bong. Also, we’ll mention the complete guide on how to make a gravity bong within minutes. So, continue reading for more detailed information!
A gravity bong is a modest but useful smoking item. Moreover, it costs nothing and lets you inhale the smoke deeply because it uses discarded containers and everyday items. Both novice and experienced users can easily assemble gravity bongs. In ten minutes, you can create a gravity bong by lining a plastic cap with foil, cutting the bottom off a plastic drink container, submerging it in water, and drawing the bottle up to smoke.
Table of Contents
- Creating the Bowl
- Forming the Bong’s Body
- Using your Gravity Bong
Creating the Bowl
Here are several steps that’ll help you know how to make a gravity bong!
1. Make a Hole in the Cap
First, remove the cap from a 2-liter plastic container or comparable ones, such as a Gatorade, fruit juice, or milk bottle. This requires a hole-punching device, a drill, scissors, or a knife. Further, to drill a hole through the center of the cap, twist the tool until it turns.
2. Widen the Hole to Pinky-sized
The hole will get wider as you keep removing more of the plastic caps inside. Larger holes allow quicker pulls but deplete your smokeable more quickly. Moreover, the average size to aim for is pinky-sized.
- If you intend to utilize a bowl-shaped piece, enlarge the hole till it fits.
3. Tear off a Square of Aluminum Foil
Cut off a section large enough to hold the cap. Add additional length to ensure you have enough foil to utilize. Set the cap aside for a second.
- Instead of using foil, hold your smoking material in a socket for a socket wrench, a thimble, or another circular piece of metal.
- Although it’s a frequent misconception, using foil is not dangerous because it doesn’t release enough aluminum when you smoke to hurt you.
4. Mold the Aluminum into a Bowl
As a guide, use your finger. Holding your finger in the middle of the foil, slowly wrap the foil upward and around your finger. Furthermore, the bowl will fit within the cap and be shaped like your finger.
5. Place the Foil Inside the Cap
As you insert the foil into the cap’s hole, grab the cap and hold it top-side up. Smooth the foil’s stuck-up ends against the plastic cap by turning them downward.
6. Poke Holes in the Foil
Put the cap aside and grab a hole-punching tool. A mechanical pencil or toothpick will work fine without a hardware store tool. Make four to six holes in the portion of the foil covering the cap hole so that there is enough room for smoke to pass through. So that the foil doesn’t break, disperse them about.
Your preferred substance will only fall through if the gaps are manageable. Although foil can also be used in sockets and other metal objects, you can make a bowl by lining the inside with metal mesh.
Forming the Bong’s Body
1. Cut off the Taller Bottle’s End
A 2-liter bottle of Gatorade should be available. Count from a quarter of the way up the bottle. Cut there with a knife or pair of scissors based on your measurement. Remove the bottle’s cap. Smoke will be contained in this bottle.
2. Cut the Top off a Larger Container
The bottle should be cut in the same manner as the previous one, measuring down a quarter or halfway from the top. You can do this by using a water or milk container that is broader than the cut bottle. Simply use a sizable container instead of a bottle, like a bucket, coffee maker, pitcher, or stop sink. Moreover, these won’t require cutting.
3. Half-fill the Larger Container with Water
Place the container on the ground and fill it with tap water. Add just enough water to fill the container halfway. You will have sufficient gravity with this amount to operate the bong effectively.
Using your Gravity Bong
So, till now, we have known how to make a gravity bong. Now, it’s time to see how to use it!
1. Load the Bowl
Place your preferred legal smoking material within the previously formed indentation on the foil. The smokeable will fly out of the bong if you don’t do this before putting the rest together.
- Check to see if your substance of choice isn’t slipping through the foil holes as you pick up the cap.
2. Place the Bottle in the Water
Pick up the top portion of the Gatorade bottle. Move the 2-liter bottle top that you previously cut off into the water. Moreover, it could be necessary to hold onto your water container if it is large. With the bowl, retrieve the cap and screw it onto the bottle.
3. Pull Up the Bottle and Light the Substance
Hold the bottle firmly while getting your lighter ready. With your other hand, steadily raise the bottle while you light it. As milky smoke fills the bottle, you should notice it. Don’t take the bottle out of the water, please.
4. Unscrew the Cap and Smoke
The bottle is ready for use after the smoke has filled it. Turn the cap off. Your lips should be around the bottle as you press down to the smoke. Now, easily shoot out the smoke.
Smoking cannabis in a gravity bong is fun and different. Making it yourself is also quite simple. Make your own gravity bong easily with a few everyday things; just be sure to use it in an area where smoking is permitted. Above, we tried to mention a step-by-step guide on how to make a gravity bong within no time. So, follow the instructions as mentioned!