When your dishwasher doesn’t turn on on command, you need a quick fix, because they’ve become such a convenience. Why doesn’t my dishwasher turn on? The wash cycle won’t start if the door isn’t fully closed and latched incase of dishwasher failure. Using these typical reasons, determine the most likely reasons why your dishwasher won’t start. Fortunately, a dishwasher that won’t start is seldom a deal-breaker and can usually be fixed with a small modification. To solve this frequent problem, use these dishwasher troubleshooting suggestions.
If you find serious problems – you need to repair a dishwasher.
1. The dishwasher doesn’t have power
Dishwasher troubles are frequently caused by power issues. The dishwasher cannot start or carry out any following tasks if there is insufficient power.
How to check for power problems is as follows:
Check the power cable to make sure it is undamaged and hooked into an operating outlet incase of dishwasher failure. Extension cables can generate surges that interrupt electricity, so avoid using them. Most dishwashers are linked to a kitchen switch that has to be turned on in order for it to receive electricity. Check under the kitchen sink if required to make sure the switch is turned on.
Check your home’s circuit breaker box for tripped breakers and reset any that you find.
The dishwasher might need to be reset in order to begin a wash cycle when the power has been restored. Have you ever wanted to restart a dishwasher? The majority may be reset by holding down the power or start button for three seconds.
2. Latched Dishwasher Door
For safety reasons, the dishwasher will not operate if the door is fully closed and the latch is not latched. Always press the door firmly to make sure the latch is locked. If the door is closed correctly, but the dishwasher still will not run, the latch may be damaged and must be replaced by a professional.
Also read: Hand Washing Dishes vs Dishwasher: Which is Best to Do?
3. Mismatched Dishwasher Settings
Check the control panel on your dishwasher before starting it to ensure the settings are correct and there are no issues.
The dishwasher may not start because of the settings or problems listed below:
- The dishwasher won’t start until a wash cycle is chosen; setting not selected. Prior to hitting the start button, choose a setting.
- Wrong setting selection: Some settings can delay the start of a dishwasher.
- While Control Lock or Sleep Mode prohibits a wash cycle from starting at all, the Delayed Start function delays the start of a wash cycle. Make sure you use the ideal dishwasher settings for the load you have. Make sure a hot or extra dry option is used if you discover your dishwasher isn’t adequately drying dishes.
- Error numbers: Error codes inform you of issues that could delay a start. If an error code appears on the control panel, consult your user manual to learn what it means and how to fix the problem.
- Harm to the control panel: The control panel won’t relay orders if it is wet or damaged, which will stop the dishwasher from the beginning. It is best to have the buttons on the control panel replaced by a professional if they stop working.
4. Problem with Dishwasher Water Supply
A problem with the water supply may be to fault if your dishwasher has electricity but won’t start. A wash cycle won’t start if your household supply of water is insufficient. These problems may make it difficult to deliver water to the dishwasher:
Water shutoff valve: Make sure the valve for your water connection at home is turned on by checking it.
Check the hose that supplies water: Make sure the hose is positioned correctly and is not kinked since this might prevent water from flowing.
Water inlet valve malfunction: The dishwasher’s water supply is managed by this valve. Water won’t enter the dishwashing tub if it won’t be fully open or is jammed shut. Replace a broken water inlet valve with a professional.
5. Faulty dishwasher components
If the dishwasher still doesn’t start after performing the above steps, a faulty component may be to blame. A broken door switch will not indicate the door is closed, and a blown thermal fuse will stop all dishwasher operation.
Last but not least, a faulty control board can sometimes fail to execute commands from the control panel or fail to supply power to the component in question. After dishwasher failure, a reputable dishwasher repair company should replace them.
Also read: Dishwasher Not Draining: How To Unclog A Dishwasher?
