There are many companies who specialize in offering services in Carpet Cleaning in Sydney and across Australia who have a thorough knowledge about the processes and do an excellent execution.
But many customers do not know about the types that are available-
Table of Contents
Carpet Shampoo
This is the oldest method employed and now has been replaced by encapsulation technology. Shampooing was done to clean deep carpet soiling. But the process caused wet residues of foam on the surface that took a long time to dry. Also since no rinsing was done these residues also became sticky which caused the carpet to again get soiled.
So over time people started discarding this option for practical reasons and adopted other methods. There are many service providers that offer Carpet repair Sydney service along with other services for residential owners.
Foam Encapsulation Method
This method uses synthetic detergents that crystallize when dried and turned into powder. Loose dirt caught in carpet fibers would turn to powder when applied foam dries off. Then the carpet is vacuumed or brushed when foam dries on cleaning.
This has replaced shampooing since shampooing causes residue to remain whereas the encapsulation technique uses environmentally friendly products that leave minimal residue after cleaning. But still many prefer shampooing as they work well on heavy soils on carpet.
Hot Water Extraction Method
This is basically using steam or hot water extraction methods to clean carpets. High pressure hot water is used to stir up fibers and this dissolves the dirt.
So a cleaning agent is applied on soiled surface , the fibers are stirred up by a brush and then rinsed, Once cleaning solution is absorbed on surface of carpet for a short while, carpet is washed by a special cleaning equipment that rinses the chemical and finally it is left to dry or under air conditioned environment. This would take for a medium sized carpet two hours and four hours to dry. Many companies providing Carpet cleaning in Sydney employ this method.
Carpet cleaning in service industry-Bonnet method
This method preferred in the hotel industry gives a great surface finish that involves cleaning the top area of carpet fibers with a motorized machine that has a spinning pad immersed beforehand in a cleaning liquid that absorbs dirt from the surface of the carpet.
So Bonneting is very useful for industry like hotels and hospitality as traffic is dense and it involves carpet cleaning with less moisture and its quick drying causing less inconvenience to guests. But on the flip side since it basically works on the surface it is not good for deep soiling and also there is a tendency of chemical residue collection from spinning of equipment.
Dry Carpet Cleaning Method
This is the most popular method. Also called compound cleaning that uses the latest technology and is approved by leading carpet manufacturers as its effective and requires no drying time, making it hugely convenient. This technology first introduced in 1980’s offers a variety of cleaning agents or powders.
Since it is in contrast to conventional wet treatment methods many do not fully rely on it as it’s a dry technique. This method applies the powder or agent beneath the carpet by a motorized counter revolving brush machine opening the fibers to allow agent to settle in, it facilitates deep cleaning. The cleaning agent is made up of biodegradable material acting like tiny sponges that absorb dissolved dirt in carpet and remove it at the end of the process.
This method is safe for all types of carpet and is ideal for commercial spaces as offered by many services involved in Carpet cleaning in Sydney. While carpets are a regular focus, mattresses too need professional intervention not just in commercial properties but also in residential units. But few know the techniques that entail this process and there are ample companies offering this like Mattress Cleaning Services Sydney.
Cleaning a mattress
Mattresses are not only integral to any household they are in regular use and are abused too as they form part of essential furniture. Regular upkeep can minimize allergens and prolong the life of the mattress for years.
It’s important to clean the mattress from stains and spills as mold starts growing. Cleaning a mattress is relatively easy and requires simple tools and cleaning agents.
Remove everything on bed
Remove pillows and all other covers, sheets, over the mattress first, then you can start cleaning your mattress. Wash bedding in hot water to eradicate germs or mites. Washing frequently is a good practice to maintain hygiene.
Launder all mattress covers, sheets and pillows
All pillow cases, bed sheets, bed covers have to be removed and given for wash. While the mattress is being cleaned wash all other items in the washing machine including duvets if any.
1. Inspect well
Inspect thoroughly what and where the stains and spills are and how deep is the extent of embedded dirt as techniques vary according to extent of damage. Look out for smells, stains and discoloration.
2. Gather the necessary supplies
These include baking soda, towels, cold water, bleach free gentle detergent, dish soap. One has to practice caution in a type of detergent that should be mild odorless and will not be harsh on delicate fabric and surface of the mattress.
3. Vacuum well
Using regular nozzles for upholstery use the vacuum to suck out dirt and debris reaching out to piping, corners and seams as well.
4. Find the stains and spot to clean those areas
For discolored patches and stains, using a cloth, pour some cleaning solution and gently blot the affected area with this. Follow this up by blotting another cloth soaked in cold water. Repeat this with gentle strokes till stains are removed. Never directly apply cleaning liquid to the mattress, but dilute by using a cloth and then do the cleaning.
Commercial enzymes are used to remove stains like blood, urine or other body fluids from the mattress. Also ordinary foam of soaps may be used to clean. Some stains are removed by a combination of water and hydrogen peroxide.
5. Application of baking soda
After you remove stains and allow the mattress to dry, thinly apply some baking soda on the surface of the mattress to absorb moisture and neutralize any smell. Leave baking soda for a couple of hours and open windows for ventilation.
6. Vacuum
After baking soda application, vacuum the mattress.
7. Turn the mattress and repeat
Turn the mattress over and repeat the process. In all probability stains won’t be there beneath the mattress since it’s unexposed. Yet it might have germs, mites, dust and vacuuming will help remove all this.
No matter how good we get at home remedies, calling in experts like Mattress Cleaning Services will give a long lasting effect.
Also read: Everything You Should Know About Carpeting Install
