Every stoner has experienced the situation when they are left with a bag of the strongest cannabis but lack the means to smoke it. Knowing to manufacture your bong at home might be useful if you find yourself in a tight spot with nothing readily accessible.
Additionally serves as a fun party presentation or a terrific discussion starter. It’s crucial to understand bong construction for this reason.
It almost seems like a requirement for eternal weedy splendor. You won’t believe How to make a bong, it is easy and it could save your life one day. You can employ creativity in your leisure time even if you don’t need it.
It might be a fun little hobby to make your bong at home, either by yourself or with pals. Even if you lack creativity, you can construct a working bong from objects around the house. This tutorial will show you how to create a few straightforward DIY bongs.
Table of Contents
What is a Bong?
A water pipe called a bong is frequently used to consume marijuana or hashish. A bong is frequently the focal point of a “pothead” smoking collection. Because of this, it’s not surprising that bongs may purchase for several hundred euros.
But fortunately, there are many affordable bongs available for stoners who are less well-off. Offering much the same benefits as more expensive bongs. A clean, delicious smoking experience that cannot be compared to that of joints or vaporizers.
How Does a Bong Work?
The main distinction between a bong and a hookah or shisha is that with a hookah or shisha. The smoke is inhaled through a tube, but a bong has a mouthpiece on the pipe itself. A bong functions much the same as any other water pipe.
If you purchase a bong with a carb hole or kick hole, you pull the pipe full of smoke first. Then let go of your finger to inhale the entire concentrated cloud of smoke in one huge draw.
Another distinction is that, unlike a hookah, a bong is ignited by a flame rather than coals. Use a lighter or a bong wick, also known as a hemp wick, to ignite the bong.
How to Make a Bong?
You will require a single-serving, standard-sized water or soda bottle. Rinse off your water bottle if you’re using one. Ensure that you thoroughly clean your soda or juice container before using it.
Your bong shouldn’t have any syrupy accumulation inside. To avoid getting in the way, wash it off and remove the label. Let’s further discuss How to make a bong.
1. Putting the Downstem
The process of dismantling a pen or a marker makes creating a downstream tool the simplest. Take care to rinse off any leftover ink after carefully removing the end cap and removing the ink sponge or tube.
Because of their big diameter, markers are more effective for making DIY bongs. The diameter of your marker will eventually determine your bowl’s diameter. Pick something substantial.
Cutting both ends off with a tool like hedge clippers would be the simplest approach to prepare a pen or marker for a downstem. This will enable you to make a downstream of the required size.
Just use great caution when trimming the plastic tube. It can split if you try to cut some types of plastic in this method, especially strong clear acrylic plastic.
Cutting evenly and preventing tiny, sharp plastic fragments from flying everywhere is made simpler by using an opaque plastic pen. Also, markers that are softer and more malleable. Use the downstem and bowl from the shattered bong if you have them. You’ll save a tonne of time and work this way.
2. Making the Bowl
Aluminum foil is the ideal material to use while creating bowls. To make a piece of foil thicker:
- Fold it over itself numerous times.
- Fold the foil into the form of a little bowl using your thumb.
- Make a few tiny holes at the bottom of the bowl using a small, pointed object, like a toothpick.
3. When you Poke these Holes, Use Caution
Your weed will fall through into the bottom if they are too large. Insert the metal bowl slowly into the marking tube’s end. Roll the edges around the marking tube’s outside circumference to prevent the bowl from slipping completely in.
4. Cutting the Carb and Downstem Holes
You won’t be able to remove the downstem as you would with a typical bong. To slam your downstem in, you’re going to utilize force. If it’s there, it’s there forever. You’ll need to carve a carb into your water bottle bong to compensate for the lack of airflow.
To make room for both, you must measure and cut. The center of the bottle, right below it, is the finest location to begin.
Your carb should be on the side, and your downstem should be at the front. Make a permanent marker mark in the area your thumb will securely cover when holding the water bottle.
5. Setting up Your Water Bottle Bong
Your water bottle bong should filled with water. Just enough is required to cover the downstem’s base. Ensure the bottle is fresh. You’ve used too much water if you tilt it as though you’re about to use it. Water can seep out of the carb hole or the region surrounding the downstem.
Whereas the downstem is still placed into the bottle, finely grind your marijuana and load your aluminum foil bowl. You could spill some marijuana on your carpet if you stuff the bowl first and then try to force the downstem into the bottle.
Once it is in position, you may pack it to acquire the proper fill. When filling the boil, exercise caution to avoid pressing too firmly. The foil should be intact.
6. Using a Water Bottle Bong to Smoke
Light the bowl, cover the carb with your thumb, and pull a hit by breathing into the mouth of the bottle. Release your thumb from the carb when the bottle starts to smoke, and then inhale to clear the bottle.
A full-sized desktop bong can carry more smoke than a water bottle can. On your initial attempt, you won’t likely get a significant rip. To make up the difference, take a few extra light hits.
It’s clear How to make a bong, creating the ideal homemade bong is quick, easy, and enjoyable. Once you have the proper foundation, building a downstem and bowl to start taking hits from your brand-new instrument is simple.
Nothing compares to the quality of a high-grade Glass Bong. Even constructing a Homemade Bong is perfect for cases where you are out of alternatives. Enjoy, and don’t forget to send us pictures of your creations or instructions for customizing a handmade bong.