The speakers on your iPhone may have sound problems if you purposely dropped them in the water or dropped it unintentionally. We advise ejecting the water in iPhone speaker if the sound is muted. There are a few methods for removing water from your speaker. The speaker plays a sound at a certain frequency, which drives the water out.
The Siri Water Eject shortcut, a third-party app, or a website will allow you to remove the water in iPhone speaker. You may evaporate the water with a fan or a blower or use more primitive techniques like placing your iPhone in rice or silica gel. These techniques will produce sound, and the sound’s vibration will cause the speaker to release water.
How Can You Remove Water From Your Phone’s Speaker?
Some of the water in the speaker will remain even after you take all the steps we recommended in the previous section if you use your phone while it still has water within the speaker aperture. You risk damaging the speaker and the phone’s internal components.
How to Drain Water From iPhone Speakers?
Wipe your iPhone down with a fresh cloth if you drop it in the shower or the pool. Should any other liquid, such as tea, coffee, etc., be spilled by mistake? Rinse it with fresh, cold water first, but watch the water pressure. Then dry it well with a clean cloth since there may still be residual moisture in the lightning port. It hasn’t fully evaporated before you charge your smartphone.
1. Suck the water
Not by hand. But employing a vacuum. Use your car’s vacuum if you have one because it has a low suction level. Use the lowest speed on your standard vacuum if you have one.
When using a vacuum cleaner, use extreme caution. Any blower or hair dryer should not be used since they blast air rather than suck it in. This might force the water further inside the speaker.
2. Silica Gel or Rice
Your phone may absorb all the moisture if you put it in a rice-filled container. Although it takes some time, this method generally works. Use sachets of silica gel as an alternative.
They perform a similar function when they draw moisture and oxygen from a confined environment. Therefore, place your phone in a plastic bag that has a lid. Put a package of Silica Gel in the container. Use the container’s lid to close it. Hold off for a few hours. We advise a minimum of 5 or 6 hours to remove water in iPhone speaker.
3. With an App
The first technique is entirely manual. We’re going to play a low-frequency sound using a straightforward app. The water droplets entrapped in the water grill would be stirred sufficiently for the water to trickle out of the iPhone. If you haven’t already, turn your iPhone on. From the App Store, download the Sonic app.
Once the app has been downloaded, launch the iPhone on a flat surface. Set a frequency by swiping the app up and down. After allowing the program to run for a while, tiny water drops emerge from the speaker grills. After that, clean the speaker grill with a clean towel. Repeat the procedure numerous times until no more water is visible flowing out to remove water in iPhone speaker.
You may test the sound by playing a movie or audio file on your iPhone. If it sounds natural, you’re good to go. The drawback of this technique is that the frequency is repetitive and could not be enough to erase the water droplets. Because it swiftly expels the water droplets, the other two procedures are more effective.
4. With Siri Shortcuts
Try the Water Eject shortcut if Siri Shortcuts is loaded on your iPhone. Like the Sonic app, it plays a sound that immediately pushes the water out of the speaker grill. This is how it functions. If you haven’t already, download the Shortcuts app from the App Store. Use this link to download and install Water Eject.
Touch the shortcut icon in the Shortcuts app to launch the shortcut when it has been installed. It would start to spit water from the grills while playing a sound frequency that your ears may not hear. Play an audio file to hear the speaker’s natural sound once it has resumed.
Your phone is disassembled so that the inside components may dry
If none of these tools are available to you, it could be required to disassemble your gadget. Most individuals can’t accomplish it independently, but you shouldn’t take it to an unlicensed provider since they could do more harm than good.
If this applies to you, find a reputable repair facility nearby and bring your phone there whenever you’re ready to give them the go-ahead to fix it. Additionally, you should be aware that not all phone manufacturers permit disassembly. If you possess a phone from one of these manufacturers, it would be wiser to let a professional handle it as they have the necessary equipment and training to do it securely.
Bring your phone to the store for repairs.
You should be able to preserve your device using this procedure. Even so, it can already be too late if the water damage signal trips. We advise you to bring your gadget to a repair shop so they may assess its condition and propose the next actions.
After attempting these solutions, if there is no evidence of water within your device. Use the rice method and wait 48 hours before turning it back on. This will confirm whether any traces of water are still there.
Conclusion
Water seeps into every hole when you drop your pricey smartphone while using it next to the water. Even if you could remove the water from the surface and charging port, it might be difficult to remove it from the speaker.
This article covered the fundamental actions you should take if you drop your smartphone in water. Moreover, accidentally spill liquid on it. After that, we witnessed various procedures for clearing water from a phone speaker.
Also read: Learn About Last Line No Longer Available iPhone 13
