Apple’s AirPods have swiftly risen to the top of the earphone heap. These very adaptable gadgets are perfect for various uses, including hands-free use of an iPhone, making calls, and listening to music.
The most frequent reasons Airpods become too quiet are earwax or dust entering them and obstructing the speakers. A volume restriction may have been set on your smartphone. Your iPhone may be in low power mode because of a low battery or another possibility. There are several more possible factors, besides these three major ones, for why your AirPods can be too silent.
Table of Contents
Why are Your Airpods Too Quiet?
You must investigate the root of the problem if your AirPods are operating too quietly. Fortunately, though silent AirPods are annoying, there are a few plausible causes for this issue. All of which can be fixed by following a few straightforward actions.
Check the volume on your iPhone or another Bluetooth-connected device to the AirPods as soon as possible. Increase the device’s volume and check the visual meter on the screen to see whether the book is set too low. You are aware that this isn’t the cause of the AirPods’ audio playing too quietly. If the volume on your iPhone or other device is set to a high level.
How to Make Airpods Noiseless
To start, determine whether the issue affects all of the gadgets you use your AirPods with or simply one of them. As a result, if you run into a problem on your Mac, try them on your iPhone or iPad, and vice versa. You can determine whether the issue is with your AirPods, Mac, or iPhone. There are a few alternatives if your AirPods are the issue. Here is what to do.
Keep Your Airpods Clean
You already know that AirPods may occasionally become rather dirty. Therefore, cleaning them with a moist, soft, lint-free cloth should be done first. Make certain that the fabric is just wet. Avoid letting your AirPods get damp.
Clean both the charging port and the casing in the same manner. If you have those models, you may take the silicone ear tips off of your AirPods Pro and wash them in cold water. Before reattaching them, make sure they are dry.
Reset and Recharge Your Airpods
The next step is to recharge your AirPods and their case once you’ve cleaned them. Even though they appear to have a sufficient charge level, there may be a problem with the battery indication.
Therefore, it makes sense to rule that possibility out. Try using them again after recharging them. If the volume of your AirPods is too low on one device but not on others. The Bluetooth connection or the device may be at fault.
Verify The Volume
Although it should go without saying, check sure the volume on the afflicted device is cranked up before doing anything else. Click the Control Center and move the slider to the right if that’s your Mac. Check to see whether the app you’re using has its volume cranked up and isn’t muted.
Execute Upkeep Scripts
There are several reasons your Mac could play quietly via your AirPods. Running maintenance scripts is the quickest approach to handling numerous of them simultaneously. Using an app made specifically for the purpose is the fastest method to accomplish that.
CleanMyMac X does the job the best. It may do several more maintenance procedures and execute maintenance scripts. Such as clearing up RAM, deleting unused Time Machine snapshots, and reindexing Spotlight.
Verify The IPhone’s Settings
Check your iPhone’s settings if the volume on your AirPods is too low when you use them with your iPhone. Select Sound & Haptics > Headphone Safety from the Settings app. Make sure the toggle switch for Reduce Loud Sounds is off. Make sure the Ringtone and Alert Volume slider is close to the right-hand side if the issue involves the ringer and alert noises.
Additionally, you should look over the accessibility options since they might occasionally be set up in a way that makes your AirPods too quiet. Go to Settings, then choose Accessibility, Audio/Visual, and finally, Braille. Ensure that the slider is centered between L and R. Tap Accommodations for Headphones. Turn them off and back on if the toggle switch is currently on.
Low Battery
Even while it might seem apparent, it’s nevertheless important to verify. Your AirPods’ ability to produce sound will decrease if they don’t have enough power to function. When doing your test, make sure both of your AirPods are charged. Additionally, check to see whether your charging case has any influence in case you need to recharge your AirPods.
Check to see whether the charging case and AirPods are working correctly at this time as well. Don’t freak out if one of your AirPods runs out of charge but the other still has juice. This happens occasionally. The output to the left and right earphones isn’t always the same. Since distinct stereo signals will activate various regions of the speakers at different times.
Equalise The Volume on Both Airpods
There are occasions when what you think is a lower volume is simply one AirPod playing at a much lower volume than the other. Due to a Bluetooth pairing error, this issue might arise when AirPods are synced at various levels. If one AirPod is playing back at a lower volume than the other, you might not be able to tell.
Fortunately, there is a simple method to learn. All you need to do is remove and re-insert one of the AirPods. Before continuing, wait until both AirPods have reconnected. If the process above fails to calibrate the AirPods. Try reducing the volume on both before reconnecting them simultaneously to see if it resolves the issue.
Conclusion
Your AirPods could be too silent for a variety of reasons. Determine if the issue is with the AirPods themselves, the device you’re using them with, or the connection to that device as your first job. If the problem is with the AirPods, cleaning them often solves it. If not, unpairing and repairing them should solve the problem. In any event, use the methods described above to figure out why your AirPods are so silent and to fix the problem.
Also read: The Airpods Recall Program for AirPods Pro
